Automatic home backup power · Serving Hudson, NH

Standby Generator Installation in Hudson, NH

Keep the household essentials you choose backed up when utility power goes out. Sylvester Electric plans and installs Generac standby generators around your home’s electrical loads, fuel supply and available space.

Generac home standby generator installed on a pad beside a hedge

From essential circuits to broader whole-home coverage, we explain the equipment, installation scope and price before you decide.

Family-owned since 1979. Our office is at 1794 Bridge St, Unit 9A, Dracut, MA 01826.

Family-owned since 1979Based in DracutLicensed in MA & NHClear installation scope and pricing

Backup power planned for your Hudson home

Tell us what needs to keep running at your Hudson home. A heating system, well pump or home office can make different demands on a backup system, especially when equipment starts up together.

We serve Hudson Center and homes around Benson Park, along with the rest of Hudson. Hudson’s housing includes detached single-family homes, condos and two-family properties. A detached home may offer more siting options, while shared exterior space and separate electrical services can affect what is practical at a condo or two-family home.

24 kW Generac installation near Sunland Drive

We installed a 24 kW Generac standby generator at a home near Sunland Drive in Hudson, NH. We sized the generator around what the homeowner wanted to keep running during an outage. The installation passed inspection.

★★★★★

Generac standby generator on a mounting pad at a Hudson home
Installed Generac generator
Side view of the same Generac standby generator showing the equipment enclosure and mounting pad
Side view of the installation

Planning other work too? Visit our Hudson electrician page for local electrical services.

Choose the backup coverage that fits your household

Generator capacity is based on the equipment you want backed up, including motor starting demand. We assess those loads and the transfer equipment together.

Essential-circuit backup

Prioritize selected circuits such as heating controls, refrigeration, lighting, a pump and a few outlets. The assessment identifies which equipment can be supported and how the circuits will connect.

Broader whole-home coverage

Support more of the home with a generator and transfer system sized for the plan. Load management may pause selected large appliances so the system can serve your priorities within its capacity.

Have an EV charger, heat pump or electric appliances? Tell us which loads you want available during an outage. A whole-home connection does not mean every appliance can run at the same time. We explain the intended coverage and any load management in the proposal.

What matters most when the lights go out?

Heat and household comfort

Furnaces, heat pumps and air conditioning have different electrical demands. We review the actual equipment so the backup plan reflects how your home is heated and cooled.

Pumps and refrigeration

If your home has a well pump or sump pump, include it in the discussion. Pumps, refrigerators and freezers can need extra power when their motors start.

Work, lights and everyday needs

Choose the circuits that help your household function, including lighting, outlets and internet equipment. Internet availability also depends on your service provider.

A standby generator has a startup and transfer delay. Equipment that requires continuous power needs a separate uninterrupted-power plan from its equipment provider.

How automatic standby power works

A standby generator is installed outdoors and connected to your electrical system through automatic transfer equipment.

When utility power fails, the system starts the generator and transfers the backed-up loads after the startup delay. When utility power is restored and stable, it transfers back and the generator completes its shutdown sequence.

The installation includes suitable transfer equipment to isolate the backed-up circuits from utility power. During startup checks, we test the system’s response to an outage and restoration, then show you the controls and exercise schedule.

Generac transfer equipment with Sylvester Electric service and circuit directory labels

Automatic transfer equipment

The transfer equipment is selected to match the generator connection and the loads being backed up. We explain the proposed equipment and any related electrical changes during your assessment.

Plan the fuel supply and generator location together

Natural gas

Where gas service is available, a qualified fuel contractor checks the meter, pressure, supply capacity and routing needed for the selected generator. Existing gas service alone does not confirm that the connection is ready.

Propane

Tank capacity, regulator sizing, generator demand and refill access all matter. Your propane supplier or qualified fuel contractor helps establish the tank and fuel-line scope for the installation.

Outdoor placement

We consider the model’s required clearances, nearby openings, service access, noise, snow accumulation and local requirements. The wiring route, fuel connection and site preparation also affect the location.

Natural gas or propane connection work is scoped separately and may require coordination with a qualified fuel contractor. We identify those responsibilities in the proposed work.

A panel upgrade is considered only when existing equipment, capacity or the project design calls for one. Learn more about electrical panel and service upgrades.

Our standby generator installation gallery

Generator and installation photos from Sylvester Electric’s existing gallery. Equipment and placement are selected for each property.

Generac standby generator beside Sylvester Electric vans in a snowy driveway
Installed Generac standby generator on a concrete pad beside a home
White Generac standby generator installed on a pad beside a hedge
Technician positioning the cover of a Generac standby generator during installation
Close-up of Generac branding on the side of a standby generator
Technician preparing a Generac home standby generator beside a house

From the first assessment to startup

Review your backup priorities

We assess electrical loads, existing equipment, future plans and what you want operating during an outage.

Confirm placement and scope

We review the generator location, wiring route, site preparation, transfer equipment and separate fuel work, then explain the proposed price.

Coordinate the approved work

We confirm applicable Hudson electrical permit and inspection steps, fuel coordination, equipment availability and the expected installation sequence.

Install, test and review

We complete the approved electrical work, coordinate required inspections, test outage transfer and restoration, and review operation and maintenance with you.

The Hudson Inspectional Services provides local electrical permit information. Fuel work may involve separate permits and scheduling.

What affects the installed price?

A complete installation involves more than the generator itself. Your quote depends on the generator and transfer equipment, backed-up loads, electrical route, site preparation, fuel connection, permit needs and any related electrical changes.

We assess the property and explain what is included, what is separate and how any additional work would be approved. The schedule also depends on equipment, permits, fuel work and inspections, so we discuss the overall process before work begins.

Ask about current financing options and see our discounts and financing information. Availability, approval and terms depend on the current offer and provider.

Why Hudson homeowners call Sylvester Electric

Clear recommendations

We explain generator sizing, the transfer equipment and the scope for your property so you can make an informed decision.

Licensed electrical work

Our Massachusetts and New Hampshire license information is in the footer. We review the permit, inspection and coordination steps for your approved project.

What customers say about our generator work

Generator reviews from across our service area.

★★★★★

“They were here to program our generator, and they got the job done quickly.”

★★★★★

“I had Sylvester Electric install a generator transfer switch and two inlets, one outside and another inside.”

Hudson standby generator questions

What size standby generator does my Hudson home need?

The right size depends on the running and starting loads of the equipment you want backed up. We review heating and cooling, pumps, refrigeration and other priorities, along with the existing electrical system and possible load management. Square footage alone does not determine the right generator.

Can a whole-home generator run everything at once?

Coverage depends on generator capacity, fuel supply, transfer equipment and the loads operating at the same time. Some systems use load management to pause selected large loads. Your proposal should identify which equipment is covered and any operating limits.

Can I use natural gas or propane?

Many home standby generator models support natural gas or propane when configured for the selected fuel. The assessment includes available fuel, required pressure and capacity, line routing and any tank needs. Fuel work is scoped separately and may require a qualified fuel contractor.

Where can a generator be installed on a Hudson property?

A standby generator is installed outdoors in a suitable location that meets the specific manufacturer’s instructions and applicable local requirements. We review windows, doors, vents, property constraints, noise, service access, snow accumulation and the routes to the electrical and fuel connections.

Do I need permits and inspections in Hudson?

We confirm the electrical permit and inspection steps for the proposed installation with the local permitting office. Gas or propane work may require separate permits and coordination. Your written scope should identify the work and who is responsible for each part.

How much does standby generator installation cost?

The installed price depends on the generator and transfer equipment, backed-up loads, wiring distance, site preparation, fuel work, permit needs and any related electrical changes. We assess your home and explain the proposed scope and price before you authorize work.

How long does the installation process take?

On-site electrical installation typically takes hours. The overall project schedule also depends on assessment, equipment availability, permits, site preparation, fuel connections, inspection and startup. We discuss the expected sequence and any planned power interruption before work begins.

Does a standby generator need a panel upgrade?

A panel or service upgrade is considered only when the existing equipment, service capacity or installation design calls for one. We assess the generator connection and your electrical system together, then explain any recommended changes in the proposal.

Can you help with an existing generator?

Call our office with the generator model and a description of the issue or service needed. Our team will confirm the available service scope and appointment options. Routine maintenance follows the manufacturer’s schedule.

Request a standby generator consultation in Hudson

Tell us about your home and the equipment you want to keep running. Our team will follow up to discuss the next step and appointment availability.

During business hours, our team follows up as soon as possible. Messages received after hours are returned the next business day.

Let’s plan backup power for your Hudson home

Discuss your priorities, available fuel and installation options with Sylvester Electric.