For property managers, facility managers & construction teams

Commercial Electrician in the Merrimack Valley & Southern NH

Electrical repairs, tenant fit-ups, fire alarm systems, equipment wiring and planned maintenance for your property or project. Based in Dracut, we serve Lowell, Tewksbury, Andover, Lawrence and Billerica, plus the wider Merrimack Valley and Southern New Hampshire.

Commercial repairs · Maintenance · Tenant buildouts · Planned installations

Find the right help for your property

Commercial Electrical Repairs & Installations

From a service call to a tenant fit-up, we help property managers, facility teams and contractors define the electrical work their buildings need. Tell us about the property, the affected systems and your project timeline.

Electrical Repairs & Troubleshooting

Troubleshoot tripping breakers, failed lighting, nonworking outlets and power problems in offices, retail spaces and commercial facilities. We assess the affected circuits and equipment to identify the cause and discuss the repair scope. Share fault symptoms, equipment details and access restrictions so the visit can be planned around your business.

Commercial Service Upgrades & Increased Power Capacity

Need more power for your facility? We install commercial electrical service upgrades for added equipment, expanded operations and tenant changes. We assess existing capacity, equipment loads, panels and power distribution to define the upgrade. Service size, utility coordination, permits and planned shutdowns are confirmed for the project; a panel replacement alone does not increase the power available to the building.

Tenant Fit-Ups, Buildouts & Renovation Wiring

Coordinate electrical wiring for tenant fit-ups, office renovations and commercial buildouts. The scope can include lighting, outlets, dedicated circuits and equipment connections for the proposed layout. Share drawings, tenant requirements and construction milestones so we can discuss rough-in, finish work, access and coordination with your general contractor or construction manager.

Lighting Installation

Install or replace lighting in offices, shops, common areas and commercial workspaces. We review fixture locations, controls and how each area is used to help define the installation. For occupied properties, discuss access and work timing early. LED retrofits, parking lot lighting, exit signs and emergency lighting are explained below.

Dedicated Equipment Circuits

Add electrical circuits and connections for commercial equipment using the manufacturer’s voltage, phase and load requirements. We assess the existing supply, wiring route and connection needs before installation. Provide equipment nameplates and specifications early so your facility team or contractor can coordinate delivery, placement and any necessary shutdown.

Inspections & Maintenance

Address electrical inspection findings, recurring faults and maintenance concerns at your commercial property. Share prior reports and known issues so we can discuss the systems to review, proposed repairs and documentation needs. Permit and inspection coordination is defined for the electrical scope, with recurring maintenance arranged around your facility’s equipment and schedule.

Also available: commercial LED retrofits, parking lot lighting, exit and emergency lighting, three-phase equipment wiring, EV charging, generator installations and scheduled maintenance.

Lighting, equipment & reliable power

Commercial Electrical Installations, Upgrades & Maintenance

When your business adds equipment, changes its layout or updates aging electrical systems, the right plan starts with the existing installation. These services are available for commercial projects across the Merrimack Valley and Southern New Hampshire.

Commercial LED Lighting Retrofits

Replace aging lighting with LED fixtures selected for the tasks and occupied areas in your building. We review fixture condition, mounting, light levels and existing controls before recommending a retrofit. Discuss offices, work areas, storage spaces and common areas, along with access and installation timing. Energy savings depend on your existing system and how the lighting is used.

Parking Lot & Exterior Lighting

Improve visibility around parking areas, building entrances and exterior work areas. Sylvester Electric provides commercial parking lot lighting repairs and upgrades, including assessment of fixtures, wiring and controls. Share pole heights, affected locations and site access requirements so lift access and work scheduling can be included in the proposed scope.

Exit & Emergency Lighting

Arrange assessment, repair or replacement of exit signs and emergency lighting. Tell us which fixtures are damaged, fail to illuminate or have been flagged during an inspection. We can discuss testing and installation needs as part of the electrical scope; the applicable requirements and inspection responsibilities are confirmed for your property.

Three-Phase Equipment Wiring

Plan electrical connections for commercial equipment using the manufacturer’s voltage, phase and load requirements. We assess the existing supply, distribution equipment and wiring route before defining the installation. Provide equipment nameplate details and drawings early; adding a breaker does not establish that a building can support the new load.

Commercial EV Charger Installation

Plan charging for employees, customers or fleet vehicles around your parking layout and electrical capacity. We discuss charger requirements, mounting locations, wiring routes and the number of vehicles you want to serve. Capacity assessment, equipment selection and any needed electrical upgrades help define the project before installation is scheduled.

Commercial Generator Installation

Start with the business functions and equipment you want to keep running during a power outage. We discuss backup loads, transfer equipment and the electrical installation, along with placement, fuel coordination and permitting responsibilities. Generator size and the final scope depend on the property and the selected loads.

Scheduled Electrical Maintenance

Plan recurring electrical maintenance around your property’s equipment, usage and operating hours. Share recurring faults, inspection findings and known concerns so we can agree on the systems to review and the maintenance tasks to perform. The visit schedule, documentation and any repair recommendations are defined for your site.

Commercial Fire Alarm Systems

Fire alarm installation, repair and testing for commercial properties and renovations. Share your existing system details, inspection findings and project drawings so we can define the work and coordinate access, testing and applicable permit or inspection requirements.

Electrical Design-Build Planning

Bring us into the planning stage of your tenant fit-up, renovation or equipment installation. We help define wiring, lighting, circuits and power requirements, then coordinate the electrical scope with your general contractor, designer or engineer where required.

Local commercial electrical experience

Commercial Electricians Serving the Merrimack Valley & Southern NH

Sylvester Electric serves business owners, property managers and general contractors from our Dracut location. Our commercial experience includes equipment wiring at FedEx in Billerica, Massachusetts, and electrical work for five renovated units at Westminster Apartment Complex.

For your property, we start with the work you need, who can authorize it and how the site operates. Whether you are arranging a repair, a tenant buildout or an equipment installation, discuss access, project documents and any power interruption before work begins.

Billerica, Massachusetts

FedEx: Automated Sorting & Packing System

Sylvester Electric completed electrical wiring for an automated sorting and packing system at FedEx in Billerica, MA.

This project is one example of our commercial equipment wiring experience.

Multifamily renovation

Westminster Apartment Complex: Five Renovated Units

We wired five renovated units at Westminster Apartment Complex. The electrical scope included power, lighting, emergency lighting and fire alarms.

The project demonstrates our experience with electrical work for apartment renovations.

Documentation for Your Project

Insurance documentation and permit coordination are available by arrangement. Tell us about your property management or general contractor requirements when requesting the work.

Scheduling Around Your Business

We plan around occupied areas, access requirements and shutdown restrictions. After-hours appointments may be available by arrangement when needed. Scheduling and availability are confirmed for each project.

Clear Pricing & Warranty Terms

Review the proposed scope, pricing and applicable workmanship warranty terms before authorizing work. Estimate arrangements and diagnostic or visit charges are confirmed for your project.

Learn about Sylvester Electric or view our Procore profile.

One clear next step for your site

Electrical Support for Property, Facility & Construction Managers

For warehouses, multi-tenant commercial buildings, retail properties and other commercial facilities, give us the property, the issue and your target timing. We will discuss whether the work needs a diagnostic visit, a site assessment or an estimate, then confirm the next step with your team.

Property & Facility Managers

Coordinate repairs, lighting, equipment connections and scheduled maintenance. Tell us about tenant access, occupied areas, purchasing requirements and who can authorize work.

General Contractors & Construction Managers

Arrange the electrical scope for tenant fit-ups, smaller buildouts and renovation projects. Share plans, specifications and phasing so scope boundaries and site responsibilities are clear.

Commercial Facility Teams

Plan electrical work around your building and equipment needs. Discuss access restrictions, shutdown windows and documentation before committing your facility to the work.

Warehouses & Distribution Facilities

Plan power for sorting, packing and other facility equipment, along with warehouse lighting, dedicated circuits and service upgrades when additional capacity is needed. Share equipment specifications, operating hours and access requirements.

Multi-Tenant Commercial Buildings

Coordinate electrical repairs and tenant fit-ups across leased spaces and shared areas. We discuss tenant access, electrical capacity, common-area lighting and any shutdowns affecting other occupants with the property management team.

Retail Stores & Shopping Properties

Arrange electrical work for retail fit-ups, changing store layouts, lighting and equipment connections. For occupied shops and multi-tenant retail properties, discuss customer access, trading hours and project phasing before work is scheduled.

For a current electrical problem, call to discuss the appropriate appointment. A request does not confirm a booking.

Scope, cost and coordination

Planning Electrical Work in an Occupied Commercial Property

Equipment and capacity

Provide equipment specifications and planned changes. Available breaker spaces alone do not establish capacity; the existing service and electrical demand need assessment.

Access and downtime

Agree on access, occupied areas and any necessary power interruptions. Routing, work at height, equipment, existing conditions and project phasing can affect the scope and cost.

Permits and inspections

Requirements differ between Massachusetts and New Hampshire and depend on the local authority and work involved. We discuss permit and inspection coordination for our electrical scope; final approval rests with the inspecting authority.

A clear starting point

From Your First Call to a Defined Scope

Business owners, property managers and general contractors can start with the property, the problem and the work they are planning.

01 / Describe the Work

Tell Us What You Need

Share the property address, affected equipment, repair symptoms or proposed changes, along with your contact details.

02 / Discuss the Visit

Choose the Right Next Step

Our team can discuss whether you need a diagnostic appointment or an estimate for planned work. Confirm any visit or diagnostic fee when scheduling.

03 / Review the Scope

Plan Around Your Site

Discuss access, occupied areas, equipment requirements and project timing. Confirm the proposed work, pricing and scheduling before proceeding.

Read Our Google Reviews   Meet Sylvester Electric

Budgeting for commercial electrical work

What Affects Commercial Electrical Pricing?

The cost of commercial electrical work depends on the installation, the existing conditions and how the work can be completed at your site. A targeted repair and a multi-stage buildout require different estimating and scheduling.

Scope & Materials

The quantity and type of fixtures, wiring, equipment connections and distribution work affect the price. Equipment specifications and drawings help define what needs to be included.

Access & Project Phasing

Ceiling height, lift access, concealed wiring routes, occupied spaces and planned power interruptions can change the labor and coordination required.

Permits & Existing Conditions

Permit and inspection requirements, equipment condition and the capacity of the existing electrical system help determine the final scope. Confirm inclusions and responsibilities in the proposal.

For a useful starting point, send your property address, description of the work, equipment details and preferred timing. We will discuss the appropriate assessment or estimate process.

Commercial Electrical Questions

Do You Work With Property Managers and General Contractors?

Yes. Sylvester Electric works with business owners, property managers and general contractors on commercial repairs, maintenance, renovations and new construction. Tell us who can authorize the work and how our team can arrange site access.

Can You Help With Office Upgrades and Tenant Buildouts?

Yes. Share your plans, layout changes, equipment needs and property location. Our team can discuss wiring, lighting, circuits and power distribution for the proposed work.

Is a Repair Visit the Same as an Installation Estimate?

No. A current electrical problem may need a diagnostic appointment to identify its cause. A planned installation starts with discussing the proposed scope. Ask about estimate availability and any diagnostic or visit charges before scheduling; the scope and applicable fees should be clear before the visit.

What Information Should I Provide When Requesting Work?

Provide your company name, contact details, property address, a description of the work and preferred timing. During follow-up, share any available plans, equipment specifications or photos, plus access restrictions and business hours that may affect the work.

Can You Work Around Our Business Schedule?

Tell us about occupied areas, access times and any restrictions on shutting off power. After-hours appointments may be available by arrangement when needed. Confirm scheduling and outage requirements with our team before making arrangements; availability depends on the scope and schedule.

What Happens After I Send a Request?

Our team can follow up to clarify the property location and work needed, discuss the appropriate appointment or estimate, and confirm the next steps. Sending a request does not confirm an appointment.

Based in Dracut

Your Commercial Electrician in Dracut, Lowell & Nearby Towns

We serve commercial properties in Dracut, Lowell, Tewksbury, Andover, Lawrence and Billerica, throughout the Merrimack Valley and Southern New Hampshire. Contact us about electrical service, tenant fit-ups, lighting, fire alarms or maintenance for your site.

View All Service Areas
Sylvester Electric service area map for the Merrimack Valley, Massachusetts and Southern New Hampshire
Contact our team to confirm coverage for your commercial property and project.

Let's talk about your property

Tell Us About the Work You Need

Tell us your company, property location and the work you need. Our office will follow up to clarify the scope and discuss the appropriate visit or estimate. For an active electrical problem, call so we can help determine the next step.

Call (978) 957-3422

Prefer online scheduling? View Our Online Booking Options. Confirm commercial service suitability and availability with our team.

Plan your project with Sylvester Electric

Licensed in Massachusetts & New Hampshire. Share drawings, equipment specifications and site requirements when discussing your project.

View our Procore profile

Procore White Badge